White Sand Max Project is a polymer-modified cementitious tile adhesive designed for installing ceramic tiles on walls and floors in both residential and commercial projects.
It can be applied on:
- Interior walls and floors
- Exterior surfaces
- Dry and wet areas
- Cement-based substrates and concrete surfaces
- General construction tiling works
Yes. It is designed for both internal and external applications and performs well under normal environmental exposure conditions.
Yes. It is suitable for wet environments such as bathrooms, kitchens, and service areas when properly applied on prepared substrates.
It is suitable for:
- Ceramic tiles
- Standard wall and floor tiles
- General construction-grade tile installations
Key benefits include:
- High bond strength
- Slump-free (non-sag) consistency
- Easy application and good workability
- Suitable for wall and floor tiling
- Reliable adhesion on multiple substrates
(Designed for productivity and consistent installation performance.)
Yes. It has a non-sag, anti-slip formulation that helps keep tiles in place during vertical installation.
It is typically supplied in 20 kg bags for standard construction use.
It is a cement-based adhesive mixed with clean water to achieve a smooth, workable consistency suitable for thin-bed application.
It provides a workable open time (around 20 minutes under standard conditions), allowing proper tile adjustment during installation.
It complies with EN 12004 (C1T classification) for cementitious tile adhesives.
It can be used for general tile sizes; however, proper installation techniques (trowel selection and back-buttering) are recommended for large formats.
Compared to traditional cement mortar, it offers:
- Higher adhesion strength
- Better flexibility and consistency
- Reduced tile failure risk
- Easier and faster application
