WHITE SAND BOND 2 is a ready-to-use, multi-purpose polymer-based bonding agent and cement modifier designed to improve the performance of cement-based mortars, plasters, screeds, tile adhesives, and repair materials. It can be used as both a bonding agent and an admixture.
WHITE SAND BOND 2 is used to improve adhesion, strength, durability, and workability in cement-based construction materials. It is suitable for tile adhesives, tile grouts, plasters, repair mortars, renders, and screeds for both interior and exterior applications.
Yes. WHITE SAND BOND 2 can be applied as a bonding agent to prepared substrates before applying plaster, render, screed, mortar, or similar cement-based finishes.
Yes. It functions as an admixture for cement-based mixes, improving mechanical properties, hydration, curing, adhesion, and overall durability.
It is suitable for:
- Cement plaster
- Cement mortar
- Tile adhesives
- Tile grouts
- Repair mortars
- Cement screeds
- Cement renders
- Other cement-based mixes
Yes. WHITE SAND BOND 2 is designed for both internal and external construction projects.
Key benefits include:
- Excellent adhesion
- Improved mechanical strength
- Reduced shrinkage and cracking
- Reduced bleeding
- Improved hydration and curing
- Better abrasion resistance
- Easy application
- Multi-purpose performance
- Suitable as both a bonding agent and admixture
Dilute 2 parts WHITE SAND BOND 2 with 1 part water, mix thoroughly, and apply using a brush or spray. While the bonding coat remains wet and tacky, immediately apply the plaster, render, screed, or mortar.
Dilute 1 part WHITE SAND BOND 2 with 2 parts water, mix thoroughly, then add the solution to the pre-blended dry cement mix. Mix for 3–4 minutes, allow it to stand for 5 minutes, then remix briefly before application.
Yes. WHITE SAND BOND 2 can be applied using spray equipment or a brush. When using a hand pump, the recommended spray coverage is approximately 15 m² per liter.
The substrate should be:
- Clean
- Dry
- Free from dust
- Free from grease and oil
- Free from loose particles
- Free from laitance, algae, paint, and varnish
Mechanical cleaning by brushing or sandblasting is recommended when necessary.
WHITE SAND BOND 2 is a formulated copolymer emulsion supplied as a milky white liquid with low VOC content.
Typical properties include:
- Type: Formulated copolymer emulsion
- Appearance: Milky white liquid
- Density: Approximately 1.02 kg/L
- pH: 5–7
- Low VOC formulation
For best results:
- Use a mechanical pan mixer whenever possible.
- Mix for approximately 2 minutes.
- Avoid excessive mixing to reduce air entrainment.
- Add water gradually until the desired consistency is achieved.
Moisture cure the modified mix for at least one day, then allow it to dry gradually to achieve optimum performance.
Clean all tools and equipment with water before the material hardens. Hardened material can only be removed mechanically.
WHITE SAND BOND 2 is supplied in:
- 20-liter drums
- 5-liter containers
The product has a minimum shelf life of 12 months when stored in its original sealed container, below 35°C, and away from direct sunlight.
No. WHITE SAND BOND 2 is not classified as a hazardous material under current legislation. However, suitable gloves and safety goggles should always be worn during handling and application.
Wash the affected area immediately with clean water. If irritation continues, seek medical advice.
For optimal results:
- Use fresh cement and well-graded aggregates.
- Avoid excessive water.
- Keep mixing time to a minimum.
- Avoid over-troweling.
- Protect fresh applications from rapid drying before finishing.
Unlike standard bonding agents, WHITE SAND BOND 2 functions as both a bonding agent and a cement modifier, improving adhesion, mechanical strength, abrasion resistance, curing, workability, and durability in a wide range of cement-based applications.
WHITE SAND BOND 2 provides reliable adhesion, improved strength, reduced shrinkage and cracking, enhanced abrasion resistance, better curing, and versatile performance as both a bonding agent and admixture, making it an excellent solution for professional construction, repair, and renovation projects.
