It is used for:

• Fixing ceramic tiles on walls and floors
• Interior and exterior tiling
• Thin-bed tile installation systems

Suitable for:

• Ceramic wall tiles
• Ceramic floor tiles

It provides strong adhesion to a wide range of ceramic surfaces.

• Easy workability
• Strong bond strength
• Anti-slip performance
• No sagging on vertical surfaces
• High productivity installation
• Smooth application consistency

Yes. It features anti-slip and no-sag properties, making it ideal for vertical applications.

Yes. It is designed for both:

• Floor tiling
• Wall tiling

It complies with:

• EN 12004 classification C1TE

This indicates a cementitious adhesive with extended open time and reduced slip.

• Approximately 4.4 liters of clean water per 20 kg bag

• • Add powder slowly into water
  • Mix with low-speed drill for ~2 minutes
  • Let it rest for 5–10 minutes
  • Remix before use

  Do not add water after setting begins.

• Approximately 1 hour

Only mix quantities that can be used within this time.

• 10–15 minutes

Tiles should be placed within this time after spreading adhesive.

• 10–15 minutes adjustability time

This allows repositioning for alignment.

• ≥ 0.5 MPa after 28 days

Measured according to EN 1348 standards.

• Shore D hardness ≥ 50

• After 24 hours

• After 48 hours

• After 14 days

The surface must be:

• Clean and sound
• Free from dust and loose particles
• Free from laitance
• Slightly damp before application

Concrete should be at least 4 weeks old.

• Apply adhesive with trowel
• Comb using notched trowel
• Press tiles firmly with slight twisting motion
• Use spacers for joints
• Ensure full tile coverage

• Minimum 48 hours after installation

• Approximately 4.5–5.5 m² per 20 kg bag

Depends on surface and application method.

• About 18 liters of adhesive mix per 20 kg bag

Yes, but appropriate protective measures are recommended:

• Wear gloves and goggles
• Avoid direct skin and eye contact
• Wash exposed skin immediately with water
• Rinse eyes thoroughly if accidental contact occurs

• Minimum 12 months

Store:

• In dry, shaded areas
• Below 35°C
• In unopened packaging

• Clean immediately with water
• Hardened material must be removed mechanically

Yes, with precautions:

• Wear gloves and goggles
• Avoid skin and eye contact
• Wash immediately if exposed

No. It is:

• Non-flammable
• Not classified as hazardous

• After approximately 2 days

Recommended to use compatible tile grout products.

• Reliable adhesion
• Easy application
• Anti-slip performance
• Suitable for wall and floor tiles
• Complies with international standards