1. What is White Sand Floor EP 100?

White Sand Floor EP 100 is a high-build, solvent-free epoxy coating designed to create durable, seamless, and chemically resistant floor surfaces.

2. What is White Sand Floor EP 100 used for?

It is used for:

  • Industrial flooring
  • Chemical plants
  • Pharmaceutical facilities
  • Hospitals and laboratories
  • Food processing areas
  • Commercial buildings
3. What are the main features of White Sand Floor EP 100?

Key features include:

  • High-build epoxy system
  • Excellent chemical resistance
  • High abrasion resistance
  • Strong compressive strength
  • Smooth, hygienic finish
  • Long service life
  • Optional anti-slip finish
  • Self leveling
4. What type of product is White Sand Floor EP 100?

It is a:

  • Two-component epoxy system (resin + hardener)
  • Solvent-free coating
  • Medium viscosity formulation
5. How is White Sand Floor EP 100 mixed?
  • Mix full contents of both components completely
  • Use a low-speed mixer for 2–3 minutes
  • Scrape sides and bottom during mixing
  • Avoid air entrapment
6. What is the pot life of the product?
  • Approximately 40 minutes at 23°C
7. What is the recommended application thickness?
  • Two coats
  • Around 200 microns per coat
8. How long does the coating take to dry?
  • Touch dry: 8–10 hours
  • Recoat: 8–36 hours
  • Full cure: 7 days
9. When can the floor be opened to traffic?
    • Light traffic after 24 hours
10. When can the coating be exposed to chemicals?
  • After full curing (6–7 days)
11. How is White Sand Floor EP 100 applied?
  • Apply with a short-nap roller
  • Spread evenly without puddles
  • Maintain consistent thickness
  • Coverage ~5 m² per liter
12. What is the coverage rate?
  • Approximately 10 m² per 4-liter can (two coats)
13. How should the substrate be prepared?

The surface must be:

  • Clean and dry
  • Free from oil, grease, and dust
  • Structurally sound

Concrete must be:

    • At least 4 weeks old
    • Moisture ≤ 5%
14. Is a primer required before application?
  • Not required for good concrete
  • Recommended for weak or porous surfaces
15. Can the product be applied on steel surfaces?

Yes, provided:

  • Surface is grit blasted
  • Suitable primer is applied
16. How can an anti-slip finish be achieved?
  • Apply first coat
  • Broadcast aggregate
  • Remove excess
  • Apply second coat
17. Is White Sand Floor EP 100 durable?

Yes. It offers:

  • High wear resistance
  • Excellent abrasion resistance
  • Long-term durability
18. Is the coating easy to clean?

Yes. It provides:

  • Smooth and seamless surface
  • Hygienic and easy maintenance
19. How should tools be cleaned?
    • Use WHITE SAND Solv 10 before curing
    • Hardened material must be removed mechanically
20. What is the shelf life of the product?
  • Minimum 12 months

Store in:

  • Dry, shaded conditions
  • Original sealed packaging
21. Is White Sand Floor EP 100 safe to use?

Yes, with precautions:

  • Wear gloves and goggles
  • Avoid skin and eye contact
  • Ensure proper ventilation
22. Is the product flammable?

No. It is:

  • Non-flammable
23. Does White Sand provide technical support?

Yes. The company provides:

  • Site support
  • Technical consultation
  • Application guidance
24. Does performance depend on application quality?

Yes. Performance depends on:

  • Proper surface preparation
  • Correct mixing
  • Quality of workmanship
25. What other products does White Sand offer?

WHITE SAND provides:

  • Tile adhesives and grouts
  • Waterproofing systems
  • Concrete repair products
  • Industrial flooring systems
  • Surface treatments and primers

Epoxy Floor EP100

Epoxy Coating Self Leveling