FLEX WHITE SAND is a flexible, cement-based waterproof coating designed to protect concrete and masonry surfaces from water penetration and moisture damage.
Lorem ipsum dolor sit amet consecte tur adipiscing elit sed do eiu smod tempor incidid
It is used for:
- Waterproofing concrete structures
- Protecting masonry surfaces
- Wet areas such as bathrooms and kitchens
- Water-retaining structures
- Exterior and interior waterproofing applications
unt ut labore.
- Flexible waterproof coating
- Good adhesion to substrates
- Water Resistance
- Suitable for immersion conditions
- Easy application by brush or roller
- Durable protective layer
It is suitable for:
- Concrete surfaces
- Cement renders
- Masonry substrates
- Internal and external areas
The substrate should be:
- Pre-wetted before application
- Clean and sound
- Free from contaminants
Surface water should be allowed to dissipate before applying the coating.
- Apply using brush or roller
- Use high-quality tools
- Apply evenly over prepared surface
- Two coats are recommended for best performance
- 1 mm per coat
- Apply first coat in one direction
- Allow it to dry and become firm
- Apply second coat perpendicular to the first
Yes. For immersion conditions:
- Cure for approximately 14 days
Yes. It is suitable for:
- Water-retaining structures
- Areas exposed to continuous moisture
Proper curing is essential for performance.
- Use steel plastering trowel
- Use hard sponge (dry)
- Avoid wet sponge to prevent surface defects
Using a wet sponge may:
- Bring polymer to surface
- Cause white streaks or lining defects
- Clean immediately with water
- Before initial curing
Hardened material must be removed mechanically.
Approximate coverage:
- 14 m² per coat (20 kg pack)
- 21 m² per coat (30 kg pack)
Actual consumption depends on substrate and application method.
- 20 kg pack
- 30 kg pack
- 12 months
Store:
- In dry, shaded conditions
- Below 35°C
- In original sealed packaging
Yes, but safety precautions are required:
- Wear gloves and goggles
- Avoid skin and eye contact
- Wash immediately if exposed
- Wash skin with soap and water immediately
- Rinse eyes with clean water thoroughly
- Seek medical advice if irritation continues
No. It is:
- Non-flammable
- Not classified as hazardous
No. Disposal should:
- Follow local regulations
- Avoid contamination of water or soil
Common applications include:
- Construction waterproofing
- Infrastructure projects
- Residential buildings
- Commercial developments
Consumption may vary based on:
- Surface condition
- Application method
- Material consistency
- Wastage factors
Yes. WHITE SAND offers:
- Technical guidance
- Product selection support
- Application consultation
Product range includes:
- Waterproofing systems
- Tile adhesives and grouts
- Concrete repair materials
- Protective coatings
- Industrial flooring systems
- Plasters and finishing materials
- Reliable waterproofing performance
- Flexible and durable coating
- Easy application
- Suitable for multiple environments
- Backed by technical support
