WHITE SAND PREMIUM FIX is a high-performance polymer-modified cementitious tile adhesive designed for installing ceramic tiles, porcelain tiles, marble, mosaics, and natural stone on walls and floors.
WHITE SAND PREMIUM FIX is used for:
- Ceramic tile installation
- تركيب بلاط البورسلين
- Marble installation
- Natural stone installation
- Mosaic tile installation
- Interior and exterior tiling applications
- Floor and wall tile fixing
The adhesive is suitable for:
- Ceramic tiles
- بلاط بورسلان
- Marble
- Natural stone
- Mosaic tiles
- بلاط قياس كبير
Yes. WHITE SAND PREMIUM FIX is designed for both wall and floor tile installations, providing excellent adhesion and anti-slip performance.
Yes. It is suitable for both interior and exterior installations and performs well in demanding environmental conditions.
أبرز المزايا:
- قوة التصاق عالية
- قابلية تشغيل ممتازة
- Long open time
- High deformability
- مقاومة للماء
- Anti-slip properties
- سهولة وسرعة التطبيق
- High productivity during installation
- Suitable for multiple substrates
A polymer-modified tile adhesive contains special polymers that improve flexibility, adhesion, durability, and resistance to moisture compared to conventional cement-based adhesives.
Yes. WHITE SAND PREMIUM FIX is specifically formulated for porcelain tile installation and provides strong adhesion even for low-absorption porcelain surfaces.
Yes. The adhesive is suitable for installing marble, natural stone, and decorative stone finishes on walls and floors.
Yes. It is suitable for installation on existing flooring and floor coverings, provided the substrate is properly prepared and structurally sound.
Compatible substrates include:
- Cement screeds
- الخرسانة
- Self-leveling compounds
- Skim coats
- Existing tiles
- أنظمة العزل المائي
- Fibre cement boards
- Plasters
- Insulation panels
- Heated screeds
Yes. It can be used on heating screeds and substrates exposed to thermal movement.
WHITE SAND PREMIUM FIX complies with:
- EN 12004 Classification: C2TE
- EN 12002 Classification: S2
C2TE indicates:
- C2: Improved cementitious adhesive
- T: Reduced vertical slip
- E: Extended open time
This classification demonstrates superior tile adhesive performance.
S2 indicates a highly deformable adhesive capable of accommodating substrate movement and thermal expansion without compromising bond strength.
Approximately 5–5.5 liters of clean water should be added to each 20 kg bag, following the manufacturer's recommendations.
Use a slow-speed electric drill with a mixing paddle for at least 2 minutes until a smooth, lump-free consistency is achieved. Allow the mixture to rest for 5 minutes, then remix before use.
The mixed adhesive remains workable for approximately 2 hours under normal conditions.
The adhesive offers an open time of approximately 30 minutes, allowing sufficient time to place and adjust tiles.
Tiles can typically be adjusted within 10–15 minutes after placement.
The adhesive achieves a tensile adhesion strength of at least 1.3 MPa after 28 days, ensuring a strong and durable bond.
لضمان أفضل أداء وقوة التصاق، يجب أن يكون السطح قبل التطبيق:
- نظيفًا
- متماسكًا وسليمًا من الناحية الإنشائية
- خاليًا من الغبار والمواد السائبة
- Free from cement laitance
- Properly cured
- Slightly damp before installation (except gypsum boards)
Concrete substrates should be at least 4 weeks old, depending on climate and curing conditions.
Apply the adhesive with a trowel and comb it using a suitable notched trowel to create uniform adhesive ribs before placing tiles.
A 20 kg bag typically covers approximately 5–6 m², depending on tile size, substrate condition, trowel size, and application technique.
Tile joints can generally be grouted after 24 hours using a suitable tile grout.
The installed surface is typically ready for light foot traffic after 48 hours.
