WHITE SAND CURE S100 is a water-based acrylic curing compound designed to reduce moisture loss from freshly placed concrete and cementitious surfaces. It forms a protective membrane that promotes proper curing, helping concrete achieve its designed strength and durability.
WHITE SAND CURE S100 is used for curing:
- Fresh concrete slabs
- Industrial floors
- Concrete pavements
- Driveways
- Bridge decks
- Concrete walls
- Concrete columns
- Cement screeds
- Repair mortars
- Precast concrete elements
Key benefits include:
- Water-based and environmentally friendly
- Reduces rapid moisture evaporation
- Improves concrete strength development
- Minimizes plastic shrinkage cracking
- Enhances surface durability
- Easy spray application
- Ready to use
- Suitable for interior and exterior applications
- Helps improve abrasion resistance
- Promotes proper cement hydration
WHITE SAND CURE ٍS100 forms a thin acrylic membrane on the concrete surface that reduces water evaporation. This allows cement hydration to continue properly, resulting in improved strength, durability, and crack resistance.
Proper curing:
Increases compressive strength
Reduces shrinkage cracks
Improves abrasion resistance
Enhances durability
Reduces dusting
Extends the service life of concrete
It is suitable for:
- Residential construction
- Commercial buildings
- Industrial facilities
- Warehouses
- Roads and highways
- Airports
- Bridges
- Parking structures
- Infrastructure projects
Yes. WHITE SAND CURE 100 should be applied immediately after the disappearance of surface bleed water or once the concrete surface is ready for curing.
Yes. It is ideal for curing industrial floors, warehouse slabs, garage floors, factory floors, and other concrete floor applications.
Yes. It is suitable for both indoor and outdoor concrete surfaces and performs well in hot climate conditions when applied correctly.
WHITE SAND CURE S100 is typically applied using:
- Low-pressure spray equipment
- Hand sprayer
- Roller
- Brush (for small areas)
A uniform, continuous coating should be applied over the entire concrete surface.
Apply immediately after finishing operations, once bleed water has evaporated and the surface is firm enough to receive the curing compound.
Coverage depends on surface texture and porosity, but WHITE SAND CURE S100 is typically applied at the manufacturer's recommended coverage rate to produce a continuous curing membrane. Rough or highly absorbent surfaces may require additional material.
Yes. By reducing moisture loss during the curing process, it allows complete cement hydration, helping concrete achieve higher compressive strength and improved long-term performance.
Yes. Proper curing reduces rapid moisture evaporation, helping minimize plastic shrinkage cracks and surface crazing.
Yes. WHITE SAND CURE S100 is supplied ready for use and does not require dilution unless specifically instructed by the manufacturer.
Yes. It is suitable for curing cement-based repair mortars, screeds, and other cementitious repair materials.
Yes. As a water-based curing compound, it produces lower solvent emissions compared to solvent-based curing products, making it a more environmentally friendly option.
WHITE SAND CURE S100 is available in various packaging sizes suitable for both small construction projects and large commercial or industrial applications.
WHITE SAND CURE S100 typically has a shelf life of 12 months when stored in its original unopened container in dry conditions away from direct sunlight and extreme temperatures.
Store the product:
- In its original sealed container
- In a cool, dry place
- Away from direct sunlight
- Protected from freezing temperatures
- Away from excessive heat
When using WHITE SAND CURE S100:
- Wear protective gloves and safety goggles.
- Avoid prolonged skin and eye contact.
- Wash exposed skin with clean water after use.
- Keep out of reach of children.
- Refer to the Safety Data Sheet (SDS) before application.
WHITE SAND CURE S100 is widely used in:
- Residential construction
- Commercial construction
- Industrial flooring
- Infrastructure projects
- Bridge construction
- Highway construction
- Precast concrete manufacturing
- Civil engineering
WHITE SAND CURE S100 provides reliable moisture retention, improves concrete strength development, minimizes shrinkage cracking, and enhances long-term durability. Its water-based, easy-to-apply formulation makes it an excellent curing solution for residential, commercial, industrial, and infrastructure concrete projects.
