Uses

• Priming and sealing interior concrete surfaces.
• Priming interior gypsum surfaces.
• Priming cement-plaster and rendered surfaces.
• Reducing the porosity and absorption of substrates.
• Improving the adhesion of subsequent decorative coatings.
• Improving the hiding power and appearance of topcoats.
• Suitable for residential buildings.
• Suitable for commercial and light-industrial interiors.

Advantages

• High-quality water-based acrylic-polymer formulation.
• Excellent penetration into porous substrates.
• Fills surface porosity and regulates substrate absorption.
• Improves the hiding power of subsequent topcoats.
• Excellent adhesion to properly prepared substrates.
• Promotes excellent adhesion of subsequent coating layers.
• High resistance to alkalinity and salts.
• High resistance to water.
• High durability.
• Fast-drying formulation.
• Ultra-low VOC content.
• Extremely low odour.
• Free from formaldehyde, ammonia and APEOs.
• Non-flammable and easy to clean with water.

Substrate Preparation

The substrate must be structurally sound, clean and free from dust, oil, grease, loose particles and other contaminants or foreign materials that may reduce adhesion.

Remove weak or loosely adhering material using a suitable mechanical preparation method. Fill cracks, holes and surface imperfections with a compatible repair or filling compound before applying WHITE SAND PRIMER SEALER – INTERIOR.

Application Conditions

• The substrate temperature during application must not be below 10°C.
• The substrate moisture content must not exceed 8%.
• The relative humidity in the working area must not exceed 70%.
• The substrate pH must not exceed 9.
• Do not apply to wet or damp surfaces.
• Provide adequate ventilation during application and drying.

Mixing and Dilution

Stir WHITE SAND PRIMER SEALER – INTERIOR carefully before application. If required, add a suitable quantity of clean tap water to obtain the correct application viscosity.

The amount of added water depends on substrate porosity, application equipment and ambient conditions. Avoid excessive dilution.

Application

1. Ensure that the substrate is correctly prepared and completely dry.
2. Apply the primer uniformly using a suitable roller, brush or spray equipment.
3. Ensure complete coverage without puddling or excessive material accumulation.
4. Allow the applied primer to dry for at least two hours at 25°C.
5. Do not apply the subsequent coating until the primer is completely dry.
6. Protect the primed surface from dust and contamination before applying the topcoat.

Yield and Coverage

WHITE SAND PRIMER SEALER – INTERIOR covers approximately 12 m² per kilogram at a dry-film thickness of 50 microns.

The stated coverage is approximate. Actual consumption depends on substrate porosity, surface condition, ambient temperature, application method, actual film thickness and material wastage.

Cleaning

Clean all tools and application equipment with water immediately after completing the work. Hardened material must be removed mechanically.

Storage and Shelf Life

WHITE SAND PRIMER SEALER – INTERIOR has a minimum shelf life of 12 months when stored in its unopened and undamaged original packaging in a dry and shaded location, protected from direct sunlight, at an ambient temperature below 35°C.

Packaging

• 20 kg plastic pails.
• 25 kg plastic pails.

Health and Safety

• Wear suitable protective gloves and safety goggles during handling and application.
• Avoid unnecessary contact with the skin and eyes.
• In case of skin contact, wash immediately with soap and clean water.
• In case of eye contact, rinse immediately with plenty of clean, cold water.
• Seek medical advice if irritation continues.
• The product is non-flammable.
• The product is not classified as hazardous under current legislation.
• Do not dispose of the material in water or soil.
• Follow applicable local disposal regulations.

Quality and Technical Support

WHITE SAND products are developed and manufactured under a quality-oriented product-development process and an independently standardized quality management system.

WHITE SAND provides technical assistance regarding substrate preparation, primer selection, dilution, application and compatible interior decorative coating systems.