Uses
- Decorative and protective coating for interior steel surfaces.
- Decorative and protective coating for exterior steel surfaces.
- Suitable for properly prepared concrete and cement surfaces.
- Suitable for wooden surfaces.
- Suitable for gypsum and compatible fibre-cement surfaces.
- Suitable for commercial buildings, hospitals, schools and offices.
- Suitable for surfaces requiring a durable semi-gloss finish.
- Suitable for internal and external applications.
Advantages
- High-quality modified alkyd formulation.
- Attractive semi-gloss finish.
- Excellent adhesion to properly prepared substrates.
- Excellent leveling properties.
- Produces a smooth and uniform surface.
- Excellent resistance to weather conditions.
- Excellent resistance to ultraviolet radiation.
- Good outdoor durability.
- Good resistance to dirt pickup.
- Suitable for multiple substrate types.
- Suitable for interior and exterior applications.
- Available in black, white and other selected colors.
Substrate Preparation
The substrate must be structurally sound, clean, dry and free from dust, oil, grease, loose particles, rust, old weak coatings and other foreign materials that may reduce adhesion.
Repair cracks, holes and surface defects using a suitable repair compound. Steel surfaces must be properly prepared and free from rust and mill scale. Wooden and mineral substrates must be dry, stable and suitably prepared.
Priming
Apply one coat of a suitable WHITE SAND SOLVENT PRIMER before applying WHITE SAND ENAMEL SEMI-GLOSS. Select the primer according to the substrate type and allow it to dry completely before applying the enamel.
Application Conditions
- The substrate temperature during application must not be below 10°C.
- The substrate moisture content must not exceed 8%.
- The relative humidity in the working area must not exceed 70%.
- Do not apply to wet or damp surfaces.
- Provide adequate ventilation during application and drying.
- Do not apply a subsequent coat until the preceding coat is completely dry.
Mixing and Thinning
Stir WHITE SAND ENAMEL SEMI-GLOSS carefully before application until a uniform consistency and color are obtained.
If required, add a suitable quantity of Normal Thinner to obtain the correct application viscosity. The required quantity depends on the application method and ambient conditions. Avoid excessive thinning.
Application
- Ensure that the substrate is correctly prepared, primed and completely dry.
- Stir the product thoroughly before use.
- Thin the material with Normal Thinner when required.
- Apply uniformly using a suitable spray gun, roller or brush.
- Maintain a dry-film thickness of approximately 50 microns per coat.
- Ensure complete coverage and avoid excessive application, sagging or puddling.
- Allow each coat to dry completely before applying the subsequent coat.
- Provide adequate ventilation throughout application and drying.
Yield and Coverage
The theoretical coverage of WHITE SAND ENAMEL SEMI-GLOSS is approximately 12 m² per litre at a dry-film thickness of 50 microns.
The stated coverage is theoretical. Actual consumption depends on substrate condition, surface profile, application method, actual film thickness and material wastage.
Cleaning
Clean all tools and application equipment with Normal Thinner immediately after use. Hardened material must be removed mechanically.
Storage and Shelf Life
WHITE SAND ENAMEL SEMI-GLOSS has a minimum shelf life of 12 months when stored in its unopened and undamaged original packaging in a dry and shaded location, protected from direct sunlight, at an ambient temperature below 35°C.
Keep containers tightly closed and away from heat, sparks, naked flames and other sources of ignition.
Packaging
- 3 kg steel pails, supplied in cartons containing four pails.
- 15 kg steel pails.
Health and Safety
- Wear suitable protective gloves, safety goggles and protective clothing.
- Avoid contact with the skin and eyes.
- Avoid inhaling paint mist and solvent vapours.
- Apply in a well-ventilated area.
- Keep away from heat, sparks, flames and ignition sources.
- In case of skin contact, wash immediately with soap and clean water.
- In case of eye contact, rinse immediately with plenty of clean, cold water.
- Seek medical advice if irritation continues.
- Do not dispose of the material in water or soil.
- Follow applicable local disposal regulations.
Quality and Technical Support
WHITE SAND products are developed and manufactured under a quality-oriented product-development process and an independently standardized quality management system.
WHITE SAND provides technical assistance regarding substrate preparation, primer selection, thinning and the application of enamel coating systems.
