Bonding Tile Primer – (Rough)

Ready-to-Use Acrylic Primer for Smooth and Low-Absorbent Surfaces

WHITE SAND TILE PRIMER (ROUGH) is a high-quality ready-to-use acrylic primer designed to increase adhesion on smooth and low-absorbent surfaces. It provides a rough textured bonding layer and enables the installation of new tiles over existing tiles without demolition.

Check the FAQ section.

Order on WhatsApp

Properties

Technical Data

Properties

Property	Description
Type	Ready-to-use acrylic primer
Finish	Rough textured bonding layer
Suitable Surfaces	Ceramic, marble, natural stone, smooth concrete, brick, wood, metal and epoxy
Applications	Interior and exterior walls, floors and ceilings
Application Tools	Roller or brush
VOC and Solvent Statement	Extremely low VOC emissions; solvent free
Color	Blue
Coverage	0.3 – 0.5 kg/m²
Packaging	20 kg.

Technical Data

Uses

Preparing ceramic, marble and natural-stone surfaces for new tile installation.

Installing new tiles over old tiles.

Improving adhesion of plaster or render on smooth concrete and brick.

Use on wood, metal and epoxy surfaces.

Walls, floors and ceilings in interior and exterior applications.

Advantages

Ready to use.
Forms a rough textured bonding layer.
Supports plaster, levelling compounds and cementitious tile adhesives.
Suitable for walls, floors and ceilings.
Interior and exterior use.
Very low odour and extremely low VOC emissions.
Solvent free.

Surface Preparation

Surfaces and application areas must be properly prepared, clean and free from dust, loose material, oil, grease, laitance and other contaminants that may impair performance.

Mixing and Preparation

The product is ready to use. Stir thoroughly until homogeneous before applying directly from the bucket.

Application

Clean the surface thoroughly to remove dust and impurities. Stir the product well, then apply it evenly with a roller or brush.

Cleaning

Clean tools and equipment with water immediately after use and before the material hardens. Hardened material must be removed mechanically.

Health and Safety

Wear suitable protective gloves and safety goggles.
Avoid unnecessary contact with skin and eyes.
Wash skin with soap and clean water after contact.
Rinse eyes immediately with plenty of clean, cold water and seek medical advice if irritation continues.
Follow applicable local disposal requirements and do not dispose of material in water or soil.

Quality and Technical Support

WHITE SAND products are developed and manufactured through quality-oriented processes and a standardised quality management system. Technical support and application guidance are available from WHITE SAND.