White Sand Mega Fix is a high-performance polymer-modified cementitious tile adhesive designed for fixing ceramic, porcelain, marble, and natural stone tiles on walls and floors in both interior and exterior applications.
It is suitable for a wide range of substrates including:
- Cement screeds
- Concrete surfaces
- Existing tiles
- Waterproofing layers
- Plaster and cement-based renders
- Interior and exterior installations
Yes. It is designed for areas exposed to moisture such as bathrooms, kitchens, balconies, and semi-outdoor or exterior environments.
It supports installation of:
- Ceramic tiles
- Porcelain tiles
- Marble and natural stone
- Medium to large format tiles (depending on application method)
Key performance features include:
- High bond strength
- Strong water resistance
- Anti-slip, non-sag formulation
- Improved workability for installers
- Durable adhesion under demanding conditions
Yes. It provides sufficient open time for tile positioning, allowing installers to adjust alignment before initial setting.
It is a cement-based powder adhesive that requires clean water mixing until a smooth, lump-free consistency is achieved. Exact water ratio depends on conditions and tile type.
Setting time depends on temperature and humidity, but it typically allows:
- Initial grab within a few hours
- Grouting after proper curing (commonly within 24 hours under normal conditions)
Yes. It is designed with a non-slip (anti-slip) formulation to prevent tile slippage on vertical surfaces.
Yes, but proper trowel selection and back-buttering techniques are recommended to ensure full coverage and bonding strength.
Compared to standard adhesives, Mega Fix offers:
- Higher flexibility and deformation resistance
- Stronger adhesion in wet and exterior conditions
- Better performance on demanding substrates
White Sand tiling systems are generally engineered to meet international construction chemical standards for cementitious tile adhesives, depending on product classification.
