White Sand Floor M10 is a monolithic, non-metallic surface hardener designed to improve the durability, abrasion resistance, and wear performance of concrete floors.
White Sand Floor M10 is used to create hard-wearing concrete floors in industrial, commercial, and high-traffic environments where enhanced surface durability is required.
It is broadcast onto freshly placed concrete and integrated into the surface to form a dense, non-porous, abrasion-resistant monolithic floor finish.
The product provides high abrasion resistance, excellent impact resistance, resistance to oils and solvents, easy maintenance, and a dust-free floor surface.
No. White Sand Floor M10 is a non-metallic floor hardener, making it non-rusting and suitable for various industrial applications.
It can be used in warehouses, factories, workshops, loading bays, car parks, power stations, and other heavy-duty traffic areas.
Yes. Its high wear resistance makes it ideal for warehouse floors subjected to forklift traffic and continuous use.
Yes. It is specifically designed to improve the performance and lifespan of factory and industrial flooring.
Yes. The product provides the durability and abrasion resistance required for car parks and vehicle traffic areas.
Yes. White Sand Floor M10 is suitable for wet environments and maintains its performance under such conditions.
Yes. The hardened surface offers resistance to petrol, oils, grease, and mineral solvents.
Yes. It creates a non-dusting concrete surface that helps maintain cleaner working environments.
Yes. The dense, non-porous finish allows easier cleaning and maintenance compared to untreated concrete surfaces.
Yes. The product is available in a range of colors to meet both functional and aesthetic requirements.
White Sand Floor M10 achieves a compressive strength of at least 60 MPa, providing excellent durability under heavy loads.
The product offers high abrasion resistance, making it suitable for demanding industrial environments with continuous traffic.
It should be applied when freshly poured concrete reaches its plastic stage, where light foot traffic leaves an imprint of approximately 5 mm.
The product is sprinkled evenly over the concrete surface, floated into the substrate, and finished with steel trowels to achieve a smooth monolithic surface.
White Sand Floor M10 should be applied at a rate of approximately 3–5 kg per square meter.
A 20 kg bag typically covers approximately 4–6.7 square meters, depending on the selected application rate.
Yes. Colored versions should be applied as evenly as possible and preferably in two separate applications to maximize color uniformity.
Excessive burnishing may negatively affect the appearance and performance of the hardened surface.
Proper curing should be carried out using an appropriate curing system or by covering the surface with polyethylene sheets to reduce moisture loss.
Curing helps prevent crazing, minimizes blooming, reduces water evaporation, and ensures the floor achieves its intended physical and mechanical properties.
White Sand Floor M10 is supplied in 20 kg paper bags.
The product has a shelf life of 12 months when stored in unopened original packaging under recommended conditions.
Store the bags in a dry, shaded area away from direct sunlight and at temperatures below 35°C.
Tools should be cleaned immediately with water after use. Hardened material must be removed mechanically.
No. White Sand Floor M10 is non-flammable and is not classified as hazardous under current regulations. However, appropriate safety precautions should still be followed.
Protective gloves and safety goggles should be worn to avoid unnecessary contact with the skin and eyes.
Rinse immediately with plenty of clean water and seek medical advice if irritation persists.
Wash the affected area immediately with soap and clean water. Seek medical attention if irritation continues.
White Sand Floor M10 provides a cost-effective solution for creating durable, abrasion-resistant, non-dusting concrete floors capable of withstanding heavy industrial use while remaining easy to maintain.
