White Sand Façade TS is a polymer-modified cementitious tile adhesive designed for fixing tiles on façades and external wall systems. It is supplied as a dry powder and provides high adhesion, flexibility, and weather resistance for demanding exterior applications.
It is used for:
- Installing tiles on building façades
- Fixing large-format tiles on exterior walls
- Bonding tiles exposed to thermal and mechanical stress
- Interior and exterior tile installation systems
Façade TS is designed for harsh environmental conditions, offering:
- High flexibility to handle building movement
- Resistance to weather and moisture
- Strong adhesion under thermal expansion and contraction
These properties make it ideal for façade cladding systems in hot climates.
Yes. Although designed for façades, it is also suitable for interior applications, including walls and floors where high bonding strength is required.
It is suitable for:
- Ceramic tiles
- Porcelain tiles
- Natural stone
- Mosaic and glass tiles
- Large-format tiles
It is designed to bond both absorbent and non-absorbent tiles.
- High bond strength
- High flexibility and deformability
- Weather and water resistance
- Slump-free (no sagging on vertical surfaces)
- Suitable for heavy wall tiles
- Can bond new tiles over old tiles
Yes. It can be used for tile-on-tile installation, provided the existing surface is:
- Clean
- Stable
- Properly prepared
It can be applied on:
- Concrete
- Cement plaster
- Screeds
- Brick and block walls
- Existing tiled surfaces
Yes. It is specifically formulated to be:
- Water resistant
- Weather resistant
- Suitable for exterior façade exposure
This makes it ideal for buildings in hot and humid environments.
Yes. It has high initial grab and slump-free consistency, which prevents tiles from sliding during installation on vertical surfaces.
White Sand Façade TS complies with:
- EN 12004: C2TES2 classification
This indicates:
- C2 = High adhesion strength
- T = Reduced slip (anti-sag performance)
- E = Extended Open Time
- S2 = High Deformable Tile Adhesive
Typical performance values:
- Pot life: ~90 minutes
- Open time: ~30 minutes
- Adjustability: 20–30 minutes
- Grouting: after 24 hours
- Light traffic: after 48 hours
- Heavy traffic: after full curing period
Yes. It is specifically designed for large tiles exposed to thermal and mechanical stresses, making it ideal for modern façade systems.
Façade TS is preferred when you need:
- Higher flexibility for building movement
- Stronger bonding for façade systems
- Better resistance to weather exposure
- Safer installation of large exterior tiles
