PORCELAIN WHITE SAND is a high-performance polymer-modified cementitious tile adhesive designed for porcelain tiles, ceramic tiles, marble, and natural stone applications on walls and floors.
It is suitable for porcelain tiles, ceramic tiles, marble, natural stone, wall tiles, and floor tiles.
Tiles usually pop or detach due to incorrect adhesive type, poor surface preparation, insufficient adhesive coverage, or using cement instead of tile adhesive.
Yes. The adhesive is designed for both wall and floor applications.
Main benefits include:
- High bond strength
- Anti-slip performance
- Easy application
- Excellent workability
- Suitable for porcelain and natural stone
- Slump-free consistency
Yes. It complies with EN 12004 Class C2TE, EN 12002 Class S1, and SASO GSO 12004 Class C2TES1 standards.
Approximately 5 liters of clean water are required for each 20 kg bag.
Mix using a slow-speed electric drill with a mixing paddle for at least 2 minutes until smooth and slump-free.
The open time is 30 minutes under normal conditions.
Tiles can be adjusted within 10–15 minutes after installation.
The recommended application thickness is between 2 mm and 8 mm.
One 20 kg bag covers approximately 4.5–5.5 m² depending on substrate condition and application method.
Tiles are ready for grouting after approximately 24 hours.
The surface is ready for light traffic after approximately 48 hours.
The tiled area is ready for heavy traffic after approximately 14 days.
The tensile adhesion strength is ≥ 1.5 MPa after 28 days according to EN 1348.
Yes. It is suitable for marble, natural stone, porcelain, and ceramic tile installations.
It can be applied on properly prepared concrete and cement-based substrates.
The substrate should be clean, sound, dust-free, and slightly damp before application.
Yes, it is a high-performance tile adhesive, but waterproofing systems should still be used in wet areas where required.
The product is available in white and grey.
Yes. The VOC content is less than 20 g/L.
Yes. It has a Class A1 reaction to fire classification according to EN 13501-1.
Store it in a dry, shaded area away from direct sunlight and below 35°C.
The shelf life is 12 months in unopened original packaging under proper storage conditions.
Use protective gloves and goggles and avoid direct skin or eye contact.
WHITE SAND TILE GROUT is recommended after 24 hours of tile installation.
Porcelain White Sand
TILE ADHESIVE
