WHITE SAND
Muthapt Application Calculator
Estimate White Sand Muthapt concentrate, dilution water and total prepared mixture using the recommended application rates and dilution ratios from the product Technical Data Sheet.
Project Parameters
01
Calculate Requirement
m²
Application condition
Apply to relatively dry soil and avoid installation when rain or frost is forecast within 24 hours.
Mixing guidance
Add Muthapt concentrate to the dilution water and allow about 10 minutes for proper diffusion before application.
Calculation Report
02
Material Estimate
Report Pending
Select the intended application and enter the project surface area to calculate the recommended Muthapt material quantities.
Selected Application-
Project Area-
Dilution Ratio-
Minimum Application Rate-
Muthapt Concentrate-
Water Required-
Minimum Infusion Depth-
Total Prepared Mixture
-
Calculated from the TDS minimum application rate × project area.
Technical Implementation
-
Minimum rates and dilution ratios are based on the White Sand Muthapt Technical Data Sheet. Actual field consumption can vary with soil condition, compaction, weather, application method and workmanship. Confirm project-specific requirements with White Sand Technical Department where necessary.