White Sand Coat FC is a polymer-modified cementitious dry mix skim coat designed to provide a smooth, level surface for interior walls and ceilings before painting.
It is used to:
Fill small surface voids
Smooth and level uneven surfaces
Prepare substrates before painting
Improve surface finish quality
It is suitable for:
Interior walls
Ceilings
Concrete surfaces
Cement render
Mineral-based substrates
High smoothness finish
Good filling performance
Water resistance
High bond strength
Slump-free and no sagging
Suitable for vertical and overhead surfaces
Compatible with decorative paints
Performs well in humid and dry conditions
No. It is specifically designed for:
Interior applications only
White
Grey
8.0 – 9.0 liters of water per 25 kg bag
Add powder gradually to water
Mix using low-speed drill for ~3 minutes
Allow to rest for 5 minutes
Remix before use
Ensure a smooth, lump-free consistency.
Approximately 1 hour
Mixed material should be used within this time.
Up to 3.0 mm
Applied in multiple thin layers
≥ 0.5 MPa after 28 days
(at 0.5 mm thickness)
Surface must be:
Clean and sound
Free from dust, oil, and loose particles
Slightly damp before application
Loose materials should be removed using appropriate tools.
Yes. The surface should be:
Lightly dampened
Not waterlogged
This helps control suction and improve bonding.
- Apply using a putty knife
- Build thickness in thin layers
- Allow each layer to dry before next
- Sand final coat for smooth finish
Do not use a mason trowel.
Yes. Paint can be applied after:
- Complete drying of the finish coat
Generally:
- No curing required
However, in hot or windy conditions:
- Light water curing for at least 48 hours is recommended
Approximately 1.0 – 1.3 kg/m² per 1 mm thickness
Actual consumption depends on surface condition.
25 kg paper bags
- Minimum 12 months
Store: - In dry, shaded areas
- Below 35°C
- In unopened packaging
- Clean immediately with water
- Hardened material must be removed mechanically
Yes, but precautions are required:
- Wear gloves and goggles
- Avoid skin and eye contact
- Wash immediately if exposed
No. It is:
- Non-flammable
- Not classified as hazardous
- Avoid direct contact with skin and eyes
- Ensure proper hygiene after use
- Seek medical advice if irritation occurs
- Smooth, high-quality finish
- Strong adhesion to substrates
- Easy application
- Compatible with all paints
- Suitable for interior finishing works
