{"id":6387,"date":"2026-01-15T17:10:36","date_gmt":"2026-01-15T17:10:36","guid":{"rendered":"https:\/\/www.whitesand.sa\/?post_type=product&#038;p=6387"},"modified":"2026-08-30T06:53:36","modified_gmt":"2026-08-30T06:53:36","slug":"white-sand-m10","status":"publish","type":"product","link":"https:\/\/www.whitesand.sa\/ar\/products\/industrial-finishing\/cement-based-flooring\/white-sand-m10\/","title":{"rendered":"Floor Hardener \u2013 Dry Shake"},"content":{"rendered":"<h2>\u0627\u0644\u0627\u0633\u062a\u062e\u062f\u0627\u0645\u0627\u062a<\/h2>\n<ul>\n<li>Surface hardening of warehouse floors.<\/li>\n<li>Factory and workshop floors.<\/li>\n<li>Loading bays and logistics areas.<\/li>\n<li>Car-park floors.<\/li>\n<li>Power-station floors.<\/li>\n<li>Floors subjected to heavy traffic.<\/li>\n<li>Concrete floors requiring enhanced abrasion and impact resistance.<\/li>\n<li>Suitable for wet areas.<\/li>\n<\/ul>\n<h2>\u0627\u0644\u0645\u0645\u064a\u0632\u0627\u062a<\/h2>\n<ul>\n<li>Monolithic cementitious dry-shake floor hardener.<\/li>\n<li>High resistance to abrasion and impact.<\/li>\n<li>\u0645\u0642\u0627\u0648\u0645\u0629 \u0636\u063a\u0637 \u0639\u0627\u0644\u064a\u0629.<\/li>\n<li>Resistant to petrol, oils, grease and mineral solvents.<\/li>\n<li>Non-metallic and non-rusting.<\/li>\n<li>Produces a dense, hard-wearing concrete surface.<\/li>\n<li>Reduces surface dusting.<\/li>\n<li>Easy-to-clean finished surface.<\/li>\n<li>Suitable for wet areas.<\/li>\n<li>Available in a range of colors.<\/li>\n<li>Factory pre-mixed for consistent application.<\/li>\n<\/ul>\n<h2>Concrete Requirements<\/h2>\n<p>FLOOR M10 must be applied monolithically to freshly placed concrete. The concrete mix, placing, compaction, levelling and finishing procedures must be appropriate for the intended industrial-floor performance.<\/p>\n<p>Apply the product after bleed water has evaporated and when light foot traffic leaves an imprint approximately 5 mm deep in the fresh concrete.<\/p>\n<h2>\u0637\u0631\u064a\u0642\u0629 \u0627\u0644\u062a\u0637\u0628\u064a\u0642<\/h2>\n<ol>\n<li>Place, compact and level the fresh concrete according to the project specification.<\/li>\n<li>Allow bleed water to evaporate completely.<\/li>\n<li>When the concrete reaches the correct plastic stage, smooth the surface using a mechanical trowel.<\/li>\n<li>Broadcast FLOOR M10 evenly over the fresh concrete at approximately 3-5 kg\/m\u00b2.<\/li>\n<li>For colored floors, divide the total quantity into two applications to improve color uniformity.<\/li>\n<li>Allow the dry-shake material to absorb moisture from the concrete.<\/li>\n<li>When the material appears uniformly darkened and moistened, work it into the surface using a wooden float or power float.<\/li>\n<li>Complete the final finish using a steel trowel.<\/li>\n<li>Do not excessively burnish the final surface.<\/li>\n<li>On large floors, carry out progressive finishing immediately behind the placing team.<\/li>\n<\/ol>\n<h2>\u0627\u0644\u0645\u0639\u0627\u0644\u062c\u0629<\/h2>\n<p>Begin curing immediately after final finishing to reduce water evaporation and help prevent crazing, blooming and loss of mechanical performance.<\/p>\n<p>Apply a suitable WHITE SAND curing system or cover the complete surface using polyethylene sheets securely taped at the edges.<\/p>\n<h2>\u0645\u0639\u062f\u0644 \u0627\u0644\u062a\u063a\u0637\u064a\u0629 \u0648\u0627\u0644\u0627\u0633\u062a\u0647\u0644\u0627\u0643<\/h2>\n<p>Apply FLOOR M10 at approximately <strong>3-5 kg\/m\u00b2<\/strong>.<\/p>\n<p>Actual consumption depends on the required abrasion resistance, floor color, concrete condition, application method and project specification.<\/p>\n<h2>\u0627\u0644\u062a\u0646\u0638\u064a\u0641<\/h2>\n<p>\u064a\u062c\u0628 \u062a\u0646\u0638\u064a\u0641 \u0627\u0644\u0623\u062f\u0648\u0627\u062a \u0648\u0627\u0644\u0645\u0639\u062f\u0627\u062a \u0628\u0627\u0644\u0645\u0627\u0621 \u0627\u0644\u0646\u0638\u064a\u0641 \u0641\u0648\u0631 \u0627\u0644\u0627\u0646\u062a\u0647\u0627\u0621 \u0645\u0646 \u0627\u0644\u062a\u0637\u0628\u064a\u0642 \u0648\u0642\u0628\u0644 \u062a\u0635\u0644\u0628 \u0627\u0644\u0645\u0627\u062f\u0629.\n\n\u0623\u0645\u0627 \u0628\u0639\u062f \u062a\u0635\u0644\u0628 \u0645\u0639\u062c\u0648\u0646 \u0625\u0635\u0644\u0627\u062d \u0648\u062a\u0634\u0637\u064a\u0628 \u0627\u0644\u062e\u0631\u0633\u0627\u0646\u0629 \u0645\u0646 \u0648\u0627\u064a\u062a \u0633\u0627\u0646\u062f\u060c \u0641\u0644\u0627 \u064a\u0645\u0643\u0646 \u0625\u0632\u0627\u0644\u0629 \u0627\u0644\u0645\u0627\u062f\u0629 \u0625\u0644\u0627 \u0628\u0627\u0644\u0637\u0631\u0642 \u0627\u0644\u0645\u064a\u0643\u0627\u0646\u064a\u0643\u064a\u0629.<\/p>\n<h2>\u0627\u0644\u062a\u062e\u0632\u064a\u0646 \u0648\u0645\u062f\u0629 \u0627\u0644\u0635\u0644\u0627\u062d\u064a\u0629<\/h2>\n<p>FLOOR M10 has a minimum shelf life of 12 months when stored in unopened and undamaged original packaging in a dry, shaded place, away from direct sunlight, at an ambient temperature below 35\u00b0C.<\/p>\n<h2>\u0627\u0644\u0639\u0628\u0648\u0627\u062a<\/h2>\n<ul>\n<li>\u0623\u0643\u064a\u0627\u0633 \u0648\u0631\u0642\u064a\u0629 \u0648\u0632\u0646 20 \u0643\u062c\u0645.<\/li>\n<\/ul>\n<h2>\u0627\u0644\u0635\u062d\u0629 \u0648\u0627\u0644\u0633\u0644\u0627\u0645\u0629<\/h2>\n<ul>\n<li>Wear suitable protective gloves, safety goggles and a suitable dust mask during broadcasting and application.<\/li>\n<li>\u064a\u062c\u0628 \u062a\u062c\u0646\u0628 \u0627\u0644\u0645\u0644\u0627\u0645\u0633\u0629 \u063a\u064a\u0631 \u0627\u0644\u0636\u0631\u0648\u0631\u064a\u0629 \u0644\u0644\u062c\u0644\u062f \u0648\u0627\u0644\u0639\u064a\u0646\u064a\u0646.<\/li>\n<li>Avoid inhaling airborne powder during dry-shake application.<\/li>\n<li>Wash skin contact immediately with soap and clean water.<\/li>\n<li>\u0641\u064a \u062d\u0627\u0644 \u0645\u0644\u0627\u0645\u0633\u0629 \u0627\u0644\u0639\u064a\u0646\u064a\u0646\u060c \u064a\u062c\u0628 \u0634\u0637\u0641\u0647\u0645\u0627 \u0641\u0648\u0631\u064b\u0627 \u0628\u0643\u0645\u064a\u0629 \u0648\u0641\u064a\u0631\u0629 \u0645\u0646 \u0627\u0644\u0645\u0627\u0621 \u0627\u0644\u0646\u0638\u064a\u0641 \u0648\u0627\u0644\u0628\u0627\u0631\u062f.<\/li>\n<li>\u064a\u062c\u0628 \u0627\u0633\u062a\u0634\u0627\u0631\u0629 \u0627\u0644\u0637\u0628\u064a\u0628 \u0625\u0630\u0627 \u0627\u0633\u062a\u0645\u0631 \u0627\u0644\u062a\u0647\u064a\u062c.<\/li>\n<li>\u0627\u0644\u0645\u0646\u062a\u062c \u063a\u064a\u0631 \u0642\u0627\u0628\u0644 \u0644\u0644\u0627\u0634\u062a\u0639\u0627\u0644 \u0648\u0644\u0627 \u064a\u064f\u0635\u0646\u0641 \u0643\u0645\u0627\u062f\u0629 \u062e\u0637\u0631\u0629 \u0648\u0641\u0642\u064b\u0627 \u0644\u0644\u062a\u0634\u0631\u064a\u0639\u0627\u062a \u0627\u0644\u062d\u0627\u0644\u064a\u0629.<\/li>\n<li>Follow applicable local disposal regulations.<\/li>\n<\/ul>\n<h2>\u0627\u0644\u062c\u0648\u062f\u0629 \u0648\u0627\u0644\u062f\u0639\u0645 \u0627\u0644\u0641\u0646\u064a<\/h2>\n<p>\u064a\u062a\u0645 \u062a\u0637\u0648\u064a\u0631 \u0648\u062a\u0635\u0646\u064a\u0639 \u0645\u0646\u062a\u062c\u0627\u062a \u0648\u0627\u064a\u062a \u0633\u0627\u0646\u062f \u0648\u0641\u0642 \u0639\u0645\u0644\u064a\u0627\u062a \u062a\u0637\u0648\u064a\u0631 \u062a\u0631\u0643\u0632 \u0639\u0644\u0649 \u0627\u0644\u062c\u0648\u062f\u0629 \u0648\u0646\u0638\u0627\u0645 \u0625\u062f\u0627\u0631\u0629 \u062c\u0648\u062f\u0629 \u0645\u0639\u062a\u0645\u062f \u0645\u0646 \u062c\u0647\u0629 \u0645\u0633\u062a\u0642\u0644\u0629.<\/p>\n<p>WHITE SAND provides technical assistance regarding concrete-floor design, application timing, broadcasting rate, power floating, finishing and curing.<\/p>","protected":false},"excerpt":{"rendered":"<h2>Monolithic Non-Metallic Concrete Floor Hardener<\/h2>\n<p><strong>FLOOR M10<\/strong> is a pre-mixed cementitious dry-shake compound developed to harden and protect fresh concrete floors.<\/p>\n<p>The product combines cement, specially selected abrasion-resistant aggregates and additives that improve workability and application. It is broadcast over fresh concrete and mechanically finished to form a dense, monolithic and hard-wearing surface.<\/p>\n<p>FLOOR M10 is suitable for warehouses, factories, workshops, loading bays, car parks, power stations and other heavy-traffic floors requiring improved resistance to abrasion, impact, oils and grease.<\/p>\n<h3><a href=\"https:\/\/www.whitesand.sa\/ar\/faq-floor-m10\/\">\u0627\u0637\u0651\u0644\u0639 \u0639\u0644\u0649 \u0642\u0633\u0645 \u0627\u0644\u0623\u0633\u0626\u0644\u0629 \u0627\u0644\u0634\u0627\u0626\u0639\u0629.<\/a><\/h3>\n<hr \/>","protected":false},"featured_media":7058,"template":"","meta":{"_acf_changed":false},"product_brand":[],"product_cat":[61,63],"product_tag":[],"class_list":["post-6387","product","type-product","status-publish","has-post-thumbnail","product_cat-cement-based-flooring","product_cat-finishing-systems","first","instock","shipping-taxable","product-type-simple"],"acf":[],"_links":{"self":[{"href":"https:\/\/www.whitesand.sa\/ar\/wp-json\/wp\/v2\/product\/6387","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.whitesand.sa\/ar\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/www.whitesand.sa\/ar\/wp-json\/wp\/v2\/types\/product"}],"version-history":[{"count":29,"href":"https:\/\/www.whitesand.sa\/ar\/wp-json\/wp\/v2\/product\/6387\/revisions"}],"predecessor-version":[{"id":7056,"href":"https:\/\/www.whitesand.sa\/ar\/wp-json\/wp\/v2\/product\/6387\/revisions\/7056"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.whitesand.sa\/ar\/wp-json\/wp\/v2\/media\/7058"}],"wp:attachment":[{"href":"https:\/\/www.whitesand.sa\/ar\/wp-json\/wp\/v2\/media?parent=6387"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/www.whitesand.sa\/ar\/wp-json\/wp\/v2\/product_brand?post=6387"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/www.whitesand.sa\/ar\/wp-json\/wp\/v2\/product_cat?post=6387"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/www.whitesand.sa\/ar\/wp-json\/wp\/v2\/product_tag?post=6387"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}